Job Aid: Replacing the hard drive on the Avaya S8510 server
36 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
!
SECURITY ALERT:
SECURITY ALERT:
If the front bezel is locked, ensure that you lock it when you are finished with this
replacement procedure (see Note, p. 31).
Figure 7: Remove the front bezel from the Avaya S8510 server
2. Press the left tab of the bezel and rotate the left end away from the server.
3. Release the right end of the bezel and pull it away from the server.
4. Set the bezel aside.
Identify the defective drive
The following conditions warrant replacing a hard drive:
•
The server reports a hard drive alarm (check server logs for identity of failed hard drive)
•
The server’s front-panel LCD displays hard drive-related error codes
•
The hard drive LEDs indicate a drive failure or an impending failure
Figure notes:
1.
If locked, unlock the bezel with
the system key. See Note, p. 31.
3.
Release the right end of the bezel
and pull it away from the server.
2.
Press the left tab of the bezel and
rotate the left end of the bezel
away from the server.
2
hw851bzr LAO 021308
III
1
3