Avaya S8510, Manual, Page: 47 / 84

Label and disconnect cabling
03-602953 Issue 1 June 2008 47
Label and disconnect cabling
Be sure to label and disconnect the following connections:
1. Label and disconnect the power cord(s) from the power supply(ies) at the back of the
server.
2. Label and disconnect the Ethernet cable from the dual NIC at the back of the server.
3. Label and disconnect the power cord from the SAMP at the back of the server.
4. Label and disconnect the USB modem cable from the USB port on the SAMP at the back of
the server.
5. Label and disconnect the LAN connection (if used) from the Ethernet port on the SAMP at
the back of the server.
Remove the S8510 server from the rack
To remove the S8510 server from the rack:
1. Ensure that all cables are labeled and disconnected from the server.
2. Loosen the captive screws on both sides of the server (Note 1 in Figure 11: Remove the
S8510 server from the rack on page 48).