manualshive.com logo in svg

Avaya M-MLS, User Manual, Page: 9 / 78

Share
Download
Avaya M-MLS User Manual Download Page 9

Avaya M-MLS Routing Manager User Guide

3

Introduction

Avaya M-MLS Routing Manager User Interface

The Avaya M-MLS Routing Manager user interface includes:

•

Menu Bar - Access to Avaya M-MLS Routing Manager 
commands.

•

Toolbar - Button shortcuts to Avaya M-MLS Routing Manager 
commands.

•

Shortcut Keys - Keyboard shortcuts to Avaya M-MLS Routing 
Manager commands.

•

The Main Window:

—

The left side of the window displays a tree of folder icons, 
representing various Avaya M-MLS Routing Manager 
applications. When you select a folder, data is received from the 
router, and the appropriate pane is displayed on the right.

—

The top-right section of the window displays a table containing 
all data associated with the selected folder. Some screens do not 
contain a table.

—

The bottom-right section of the window displays fields for the 
selected table entry. To modify data in the fields, refer to 
Toolbar, Menu, and Shortcut Key Options, and Working with the User 
Interface.

* Note:  If your M-MLS device version is earlier than M-MLS 2.5, you 

will not be able to access some of the screens mentioned in 
this manual, and some of the screens will not contain all of 
the documented parameters.

Summary of Contents for M-MLS















































































Reviews:

No comments