Avaya M-MLS Routing Manager User Guide
71
Error Messages
SNMP Errors
The following are default messages displayed when an SNMP error
occurs. Usually they are overridden by an explanation. If the field causing
the problem is known, it is also reported.
Communication to the
device failed. Message
might have been lost.
General information message that is displayed
when the SNMP communications layer fails to
communicate with the device.
The route you entered is
invalid.
Displayed in the Routing Table window when
an invalid route is entered.
The ARP Table Timeout
value you entered is
invalid.
Displayed when the ARP table timeout selected
is either too big or too small.
The ARP Table entry is
invalid.
Displayed when an invalid ARP entry is entered.
You may not update an
existing Redundancy
definition. Delete the entry
and create a new one.
Displayed in the IP Redundancy window when
trying to change the parameters of an existing
redundancy.
Invalid Circuit Number.
Displayed in any of the IPX windows when an
invalid circuit number is entered.
You must specify a name
for the server.
Displayed in the IPX Services window when no
name is entered for the server.
The interface’s address and
the Main Router Address
must be different.
Displayed when trying to enter an interface
address which is identical to the address of the
Main Router.
You can’t add an interface
named X.
Displayed when trying to enter the ‘Generic’
VLAN name, which is not allowed.
Authentication key must
by X or less characters.
Displayed when an authentication key is
entered that is longer than X characters.
Table A-1. Error Messages and Explanations
Table A-2. SNMP Errors
SNMP Error Message
Explanation
The following error has occurred:
SNMP Error: Message too big.
Standard SNMP error.
The following error has occurred:
SNMP Error: No such name.
Standard SNMP error.