manualshive.com logo in svg

Avaya M-MLS, User Manual, Page: 6 / 78

Share
Download
Avaya M-MLS User Manual Download Page 6

Preface

 vi

Avaya M-MLS Routing Manager User Guide

Organization of this Guide

This guide is structured to reflect the following conceptual divisions:

•

Preface - An introduction to Avaya M-MLS Routing 
Manager.

•

Introduction to Avaya M-MLS Routing Manager - 
Instructions on how to start Avaya M-MLS Routing Manager 
and a description of the user interface.

•

Device - Enables you to display and modify global 
parameters, reset the module, define managers to send or 
prevent traps, and upload or download configuration 
parameters.

•

Layer 2 - Enables you to define manually and display layer 2 
interfaces (VLANs and bridges) at the management station.

•

IP Route - Enables you to display and update IP interfaces, 
the IP routing table, the ARP table, DHCP/BOOTP 
parameters, RIP interfaces, OSPF interfaces, area parameters, 
link state database and neighbors, the IP access control table, 
redundancy parameters, and multicast parameters.

•

IPX Route - Enables you to display and update IPX 
interfaces, RIP interfaces and routing table, SAP interfaces 
and services, and the IPX access control table.

•

Error Messages - A list of error messages that can occur in 
Avaya M-MLS Routing Manager.

Summary of Contents for M-MLS















































































Reviews:

No comments