Avaya M-MLS Routing Manager User Guide
21
IP Route
IP Interfaces
IP interfaces represent the logical connections of the device to the IP nets/
subnets attached to it. Each IP interface corresponds to one net/subnet.
When you create a new IP interface, RIP and OSPF interfaces are
automatically created and assigned enable status. When you delete an IP
interface, the device will delete the associated RIP and OSPF interfaces.
To define and display the IP interfaces, click the
IP Route
folder and select
IP
Interfaces
. The IP Interfaces window appears.
Figure 4-2. IP Interfaces Window
The following parameters are displayed:
Table 4-2. IP Interface Parameters
Field Name
Description
IP Address
The IP address assigned to the device on this
subnet.
IP NetMask
The IP network mask of the attached net/subnet.
If Name
The name of the Layer 2 interface (VLAN) with
which this subnet is associated. Multiple subnets
may be associated with a single VLAN, so multiple
IP interfaces may be associated with the same If
Name.
Status - Enabled
The status of the IP interface. If checked, the IP
interface is enabled.
