Chapter 4
30
Avaya M-MLS Routing Manager User Guide
RIP Global Parameters
To display and update RIP global parameters, click the
IP Route
folder and
select
RIP Global Parameters
. The RIP Global Parameters window appears.
Figure 4-7. RIP Global Parameters Window
The following parameters are displayed:
You can modify RIP Global Parameters by checking boxes as desired. For
more information, refer to Avaya M-MLS Routing Manager User Interface.
Table 4-7. RIP Global Parameters
Field Name
Description
RIP Global Status -
Enable
The status of RIP in the device. If checked, the
parameter is enabled, meaning that the RIP process is
active. If the parameter is not checked, the RIP process
is not active on any interface, regardless of the settings
in the RIP Interfaces window.
Leak OSPF into RIP
Controls redistribution of routes from OSPF to RIP. If
checked, all routes learned via OSPF are advertised into
RIP.
Leak Static into RIP
Controls redistribution of static routes into RIP. If
checked, the static routes inserted into the IP Routing
Table are advertised into RIP, according to the "Leak
Route" definition for each static route.