Avaya M-MLS Routing Manager User Guide
57
IPX Route
RIP Interfaces
To display and update the RIP Interfaces, click the
IPX Route
folder and
select
RIP Interfaces
. The RIP Interfaces window appears.
The RIP interface is created automatically when you create a new IPX
interface; deleting the IPX interface will also delete the RIP interface.
Figure 5-2. RIP Interfaces Window
The following parameters are displayed:
Table 5-2. RIP Interface Parameters
Field Name
Description
Circuit No
The IPX circuit number specific to the RIP interface.
Network No
The IPX network that RIP messages are accepted
and sent from.
Status - Enable
The status of the RIP interface. If checked, the RIP
interface is enabled.
State - Active
The state of the RIP interface. If the RIP status is
enabled but the IPX Interface is disabled, the IPX
RIP interface state will be inactive.
Update Interval
The RIP Periodic update interval, in seconds.
