Avaya M-MLS Routing Manager User Guide
31
IP Route
RIP Interfaces
To define and display the RIP interfaces, click the
IP Route
folder and select
RIP Interfaces
. The RIP Interfaces window appears.
Figure 4-8. RIP Interfaces Window
The following parameters are displayed:
Table 4-8. RIP Interface Parameters
Field Name
Description
IP Address
The IP address of the interface.
Send Mode
What the device sends on this interface. Values are:
•
SendAll
- RIP updates contain the entire
routing table.
•
DoNotSend
- No RIP updates are sent.
•
SendDefaultOnly
- RIP updates contain only
a single entry. This advertises the router as the
default router.
Interface State
The operational status of the RIP interface - active
or inactive.
Status - Enable
The administrative status of the RIP interface -
enabled or disabled.
