Avaya INDeX 30, Installation & Maintenance, Page: 30 / 53

Page 30 - Checking Terminals Terminal Installation
Page 30 - Terminal Installation Installation & Maintenance
INDeX 30 38DHB0002UKDF- Issue 4 (07/2001)
Connecting & Checking INDeX Display Terminals
Use the following process to connect and check INDeX display terminal.
To check an INDeX display terminal :
1. Unpack the terminal and check that all parts are present including labels and
user guides.
2. For handset terminals, insert the handset cord into the base. Route the cord
through the cable channels to come out at the side of the terminal.
3. Insert the line cord into the wall socket.
4. While holding down the
1 key, insert the line cord into the terminal's base and
then release the 1 key.
5. All the elements of the terminal display should be on, plus the terminal lamp and
any BLF lamps.
6. Press any key. The terminal should display its type and the terminal software
release.
7. Pressing any other key has the effect shown below. Check that all the display
elements appear correctly.
Key Effect
MUTE Cycles through left-hand display legends, e.g. DATE.
PROGRAM Cycles through right-hand display legends, e.g. TIME.
REDIAL Cycles through left-hand digit display.
SPEED DIAL Cycles through right-hand digit display.
HOLD Cycles through display digit separators.
ANSWER RELEASE Cycles through character display line characters.
0...9,
∗
, #
Display dialling digits.
DSS Keys Display DSS keys and cycles though BLF lamps if present.
Other keys
Display key icons (
•
).
8. Remove the line cord, wait a few seconds and then reinsert it. The terminal
display should now show the time and date plus other functions.
9. Press PROGRAM and then SPEAKER (or VIEW ). The display should show the
correct directory number, directory name and terminal type.
10. Handset Terminals Only : Lift the handset and check that you hear dial tone.
Press SPEAKER , you should hear dial tone through the speaker. Replace the
handset and press ANSWER RELEASE .
11. Turret Terminals Only : Attach a headset. Press ANSWER RELEASE and
check that you hear dial tone. Press ANSWER RELEASE again to end dial tone.
12. Make a test call to another extension.