Avaya H239 Installing And Administering Download

Page: 31 / 62

Option

Description

STUN Settings
STUN NAT Traversal

The STUN NAT Traversal estimation. If TRUE,
STUN can penetrate NAT. If FALSE, STUN cannot
penetrate NAT.

Server Address

STUN server address.

Server Port

STUN server port. The default is 3478.

Binding Period

STUN binding period, which can be used to keep
the NAT pinhole opened.

SIP Waiting Time

Timeout of STUN binding before sending SIP
messages.

SIP Hotspot page

To access this page, click the

Line

tab and then click

SIP Hotspot

. From this page, you can

configure settings for the SIP hotspot function. It is recommended to use hotspot feature in User
Datagram Protocol (UDP) only.

Configuring the SIP hotspot server and phone client

About this task

Use this procedure to configure the SIP hotspot server or client. The hotspot server must be

configured before you configure the client.

Before you begin

Ensure that the SIP account is registered. For information about the SIP parameters to be

configured, see

SIP page

on page 22. The SIP account for the SIP hotspot client is automatically

obtained from the SIP hotspot server.

Procedure

1. On the web portal, navigate to

Line

SIP Hotspot

2. In

Enable Hotspot

, select

Enable

3. In

Mode

, select one of the following:

• To configure the server, select

Hotspot

• To configure the client, select

Client

4. In

Monitor Type

, select one of the following:

•

Multicast

: To limit the broadcast packets.

•

Broadcast

: To send packets to all clients.

5. In

Monitor Address

, enter the broadcast address.

Line tab

October 2019

Installing and Administering the Avaya H239 and H249 Phones

Comments on this document? [email protected]

Summary of Contents for H239































































Search results

Summary of Contents for H239

Reviews:

Related manuals for H239

Brands by name

Popular brands

Avaya H239, Installing And Administering

Search results

Summary of Contents for H239

Reviews:

Related manuals for H239

Brands by name

Popular brands