Avaya H239 Installing And Administering Download

Page: 30 / 62

Example 4: Adding suffixes

If the dialed number ends with the fixed suffix number, the phone sends out your dialed phone

number adding suffix number automatically. Configure the dial peer settings as follows:

Field

Value

Number

138T

Destination
Port
Alias
Suffix

0088

Deleted Length

With this configuration, when you dial 1383322, the device sends 13833220088.

Example 5: Deleting prefix numbers

If the dialed number ends with the fixed prefix number, the phone sends out your dialed phone

number deleting the prefix number automatically. Configure the dial peer settings as follows:

Field

Value

Number

Destination
Port
Alias

del

Suffix
Deleted Length

With this configuration, when you dial 98322, the device sends 8322.

Basic settings page

To access this page, click the

Line

tab and then click

Basic Settings

. From this page, you can

configure basic settings for lines and upload the TLS certification file.

The following table describes SIP and STUN settings to be configured for the Avaya H239 and

H249 phones:

Option

Description

SIP Settings
Registration Failure Retry Interval

Retry interval of SIP registration when registration
fails.

SIP Invite Restrict

Use this option to restrict SIP invites.

Table continues…

Web portal navigation

October 2019

Installing and Administering the Avaya H239 and H249 Phones

Comments on this document? [email protected]

Summary of Contents for H239































































Search results

Summary of Contents for H239

Reviews:

Related manuals for H239

Brands by name

Popular brands

Avaya H239, Installing And Administering

Search results

Summary of Contents for H239

Reviews:

Related manuals for H239

Brands by name

Popular brands