Installing a New G700 without an S8300
228 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
IP Network Region Screen, Page 3
4. Type the number for the type of codec set (1–7) that the S8500 or S8700 will use to
interconnect the G700 and the C-LAN board(s) in the row corresponding to the region of the
C-LAN.
In this example, the C-LAN is in region 9 and codec-set type 3 is to be used for the
interconnection between region 1 and region 9. (In this example, codec type 1 is used for
communication within region 1)
The SAT command, list ip-codec-set, lists the types of codecs available on this server.
For more detail about the Inter Network Region Connection Management form, see
‘‘Administration for Network Connectivity for Avaya Communication Manager,
555-233-504.’’
5. Press F3 (Enter) when complete.
Assigning LSPs to the Network Regions
If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of
a network failure, IP telephones assigned to a network region will register with the LSPs
assigned to that region.
This procedure assigns up to six LSPs to a network region.
To assign LSPs to a network region
1. On the IP Network Region screen, go to page 2.
display ip-network-region 1
Page 3 of 19
Inter Network Region Connection Management
src dst
rgn rgn
codec-set
direct-WAN
WAN-BW-limints
Intervening-regions
1
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
3
1
10
1
11
1
12
1
13
1
14
1
15
