Installing a New G700 without an S8300
224 Installation and Upgrades for Avaya G700 Media Gateway and Avaya S8300 Media Server
LSP Screen
2. Enter the node name for each LSP supported by the primary controller and submit the form.
Skip to
Administering the Media Gateway
on page 231 to continue.
Administering an S8500 or S8700/S8710 primary controller
Complete the procedures in this section if the primary controller for the G700 you are installing
is an S8500, S8700 or S8710. If the primary controller is an S8300, you should have completed
the procedures in
Administering an S8300 primary controller
on page 219.
This document covers only the administration of Communication Manager required for the
G700 media gateway to communicate with the primary controller over a customer’s network.
For the majority of required administration, see ‘‘Administrator’s Guide to Avaya Communication
Manager, 555-233-506,’’ or ‘‘Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504.’’
In this section, you will use the SAT interface on the primary controller to:
●
Assigning Node Names and IP Addresses for the C-LANs and LSPs
●
Administering Network Regions
●
Assigning LSPs to the Network Regions
●
Administering IP Interfaces
change lsp
Page 1 of 16
LOCAL SURVIVABLE PROCESSOR
Number NAME
IP Address
Service
Translations
State? Updated
1 node-10-LSP_ 192.168.1.50
in-service
14:21
5/4/2003
2 ____________
out-of-service
3 ____________
out-of-service
4 ____________
out-of-service
5 ____________
out-of-service
6 ____________
out-of-service
7 ____________
out-of-service
8 ____________
out-of-service
9 ____________
out-of-service
10 ____________
out-of-service
11 ____________
out-of-service
12 ____________
out-of-service
13 ____________
out-of-service
14 ____________
out-of-service
15 ____________
out-of-service
16 ____________
out-of-service