Administer Communication Manager
Issue 7 January 2005
179
Assigning LSPs to the Network Regions
If the primary controller has LSPs, you can assign the LSPs to network regions. In the event of
a network failure, IP telephones assigned to a network region will register with the LSPs
assigned to that region.
This procedure assigns up to six LSPs to a network region.
To assign LSPs to a network region
1. On the IP Network Region screen, go to page 2.
IP Network Region Screen, page 2
2. Enter the names of up to six LSPs to be assigned to region 1.
The LSP names must be the same as administered on the Node Names form.
3. Submit the form.
4. Repeat for each network region to which you want to assign LSPs.
Administering IP Interfaces
To define the IP interfaces of the S8500 or S8700 port network CLAN boards
Note:
Note:
This should have already been established as a part of normal S8500 or S8700
installation.
1. Type
change ip-interfaces
to open the IP Interfaces screen.
change ip-network-region 1 Page 2 of 19
IP Network Region
LSP NAMES IN PRIORITY ORDER
1 node-10-LSP______
2 ________________
3 ________________
4 ________________
5 ________________
6 ________________
