Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Page: 98 / 128

Maintenance
98 Avaya IP DECT Installation, Administration, and Maintenance
DECT Monitor of the Avaya IP DECT System
For a better error detection in the Avaya IP DECT system the DECT Monitor can be used. The
DECT Monitor is an MS Windows based stand alone program. It provides the possibility to give
a real time overview of the current IP DECT base station and telephone states in the Avaya IP
DECT system.
The following features are provided by the DECT Monitor:
●
Reading out of the DECT configuration of a Avaya IP DECT system
●
Configuration can be stored in an ASCII file.
●
Display of DECT transactions IP DECT base station-telephone in clear tabular form, with
highlighting of hand over situations. Real-time display.
●
Display of further events concerning the status or actions of IP DECT base stations and
telephones of the Avaya IP DECT system.
●
All events can also be recorded in a log file
●
Display of the synchronization relations between the IP DECT base station
●
Monitoring of systems with up to 256 IP DECT base stations and 1023 telephones
●
Reading out and display of IP DECT base station statistics data, either for a single IP
DECT base station or for all IP DECT base stations.
●
Display of DECT central data of the Avaya IP DECT system.
The DECT Monitor program can only be used when the DECT Monitor flag in the ADMM
system configuration is enabled.
The DECT monitor program is used together with the Avaya IP DECT system.
When the program is started, the user is requested to enter the IP address of the IP DECT base
station or server running the Avaya DECT Mobility Manager (ADMM) software. This address is
different from the IP address of the PABX the ADMM is connected to!
There can be several reasons for non successful link establishment:
●
Operation of DECT Monitor is not enabled inside the ADMM. Use the Web-Service to
enable DECT Monitor operation.
●
IP address is not correct. It has to be the address of the IP DECT base station or Server
the ADMM is running on, not the address of the PABX!
●
A link routed through the PABX is not supported. In case of remote service on a PABX via
dial in the ADMM can not be accessed from DECT Monitor.
The program displays the IP address which was used last time.
When the program is started a link to the Avaya IP DECT system is automatically established
and program window shows all user configured child windows and tables.