Avaya Communication Manager IP DECT Installation, Administration And Maintenance Manual Download Page 53

Page: 53 / 128

Configuring the Avaya DECT Mobility Manager

Issue 1 August 2006

●

Not connected

The IP DECT base station was configured but has not connected to the ADMM yet.

The IP address column displays the current IP address of an IP DECT base station.

IP Trunks

An IP Trunk defines a communication relation between an ADMM and an Avaya communication
server for H.323 signaling.

IP Trunks can be added to the system by pressing the ‘New’ button. A popup window appears
providing the configuration of a new Trunk. Before a trunk can be added the associated IP
region has to be already configured.

Summary of Contents for Communication Manager IP DECT

































































































































Search results

Summary of Contents for Communication Manager IP DECT

Reviews:

Related manuals for Communication Manager IP DECT

Brands by name

Popular brands

Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Search results

Summary of Contents for Communication Manager IP DECT

Reviews:

Related manuals for Communication Manager IP DECT

Brands by name

Popular brands