Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Page: 25 / 128

Avaya IP DECT system start up
Issue 1 August 2006 25
Once started, the ADMM is running permanently while not stopped and when ever the PC is
running. In case of fatal errors or PC reboot, the OM recovers automatically.
!
CAUTION:
CAUTION:
Be sure that the versions of the ADMM and the IP DECT base station software
within your IP DECT installation are the same.
Installing the ADMM software
The ADMM software is available as a Red Hat Package File (RPM). You have to login as root
user, if you are going to install the ADMM.
●
For first installation of the ADMM type:
rpm –i
omm_avaya-<version-date>.i586.rpm
.
●
To ugrade the ADMM by a new version type:
rpm –U
omm_avaya-<version-date>.i586.rpm
.
●
To delete the ADMM installation type:
rpm –e omm_avaya
.
●
If you like to verify the installation type
rpm –qi omm_avaya
.
After the install procedure you can start the ADMM with the command:
/etc/init.d/omm_avaya start
Configure Start Parameter
Some basic data for initializing the ADMM are stored in the file "/etc/sysconfig/omm_avaya”. It
has to be edited, if you like to change the interface of the ADMM :
##############################################
# OMM configuration file
##############################################
# if you use a different interface for omm_avaya activate parameter below
#OMM_IF="eth0"
OMM_CONFIG_FILE="/etc/omm_conf.txt"
Parameter Description
OMM-IF Interface for communication with IP DECT base station’s (default:eth0)
OMM_CONFIG_FILE Configuration file for ADMM (default: /etc/omm_conf.txt)