Avaya Communication Manager IP DECT Installation, Administration And Maintenance Manual Download Page 13

Page: 13 / 128

Avaya DECT Mobility Manager

Issue 1 August 2006

Note:

Note:

It is possible to deactivate the DECT part of a IP DECT base station. If the DECT
Interface is deactivated then the resources (CPU and memory) are available for
the ADMM.

Avaya DECT Mobility Manager

The Avaya DECT Mobility Manager (ADMM) performs the following tasks:

●

signalling gateway (H.323 <-> DECT GAP)

●

media stream management

●

manages synch over air functions between IP DECT base stations

●

facilitates system configuration modifications

●

provides additional services e.g.

- Corporate Directory (LDAP or TFTP based)

- WML browser

The Avaya DECT Mobility Manager (ADMM) may run on one of the IP DECT base station or on
a dedicated Linux Server.

Power jack (110 V/240 V AC adapter)

Ethernet jack
Power supply in line with Power over LAN™ standard IEEE 802.3af

Light emitting diode (LED)
signalling of current operating state on the IP DECT Base Station

Summary of Contents for Communication Manager IP DECT

































































































































Search results

Summary of Contents for Communication Manager IP DECT

Reviews:

Related manuals for Communication Manager IP DECT

Brands by name

Popular brands

Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Search results

Summary of Contents for Communication Manager IP DECT

Reviews:

Related manuals for Communication Manager IP DECT

Brands by name

Popular brands