Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Page: 26 / 128

Installation and Configuration
26 Avaya IP DECT Installation, Administration, and Maintenance
To maintain the running ADMM on PC
The ADMM is installed as a daemon and runs automatically at system start.
You can start and stop the ADMM on a shell as user root with the command:
/etc/init.d/omm_avaya [start|stop|restart]
You can log to the ADMM command line interface via telnet on port 8107.
Troubleshooting:
●
To verify if the ADMM is running look at process table ( ps –e ) for the process omm_avaya.
●
If the ADMM does not start, delete the lock file: "/var/lock/subsys/omm_avaya”.
●
To delete ADMM configuration remove the OMM_CONFIG_FILE (default: /etc/
omm_conf.txt).
Booter
Booter versions
This documentation referring to IP DECT for Avaya is written for the Booter SW 3.2.x .
But note, in test installations there may be some different versions of the booter SW in use:
●
Booter version 2.1.y
This software is using BOOTP instead of DHCP.
●
Booter version 3.0.x
Replacement of the BOOTP client by a DHCP client.
●
Booter version 3.1.x
Added support for VLAN.
●
Booter version 3.2.x
added support for OpenMobility Configuration tool.
See Booter update on page 29 for details on the booter update mechanism.
DHCP client
Within the initial boot process the DHCP client supports the following parameters:
●
IP Address mandatory
●
Netmask mandatory
●
Gateway mandatory
●
Boot file name mandatory