Avaya Communication Manager IP DECT, Installation, Administration And Maintenance Manual

Page: 100 / 128

Maintenance
100 Avaya IP DECT Installation, Administration, and Maintenance
●
A log file can be activated.
●
By means of various dialogues, the configuration data of the telephones, IP DECT base
stations and control modules can be displayed and stored in ASCII files.
The following information is displayed dynamically in the tables:
●
Transactions between telephone and PABX system. These are displayed in both tables.
Simple transactions are displayed in black on a white background; during hand over, both
transactions involved are displayed in white on a red background.
●
The Location Registration and Detach events are displayed in the tables for approx. 1-2s
after their occurrence (light green background), if possible. There is no display in the FP
table if there is no column free for display. If the event has already been displayed, it can
be overwritten at any time. The events are not displayed if they occur during an on-going
transaction. Irrelevant of whether the events are displayed in the tables, they are always
entered in the "FP/PP-events" window and in the log file (provided that this is open).
The following colour scheme is used for display of the IP DECT base station in the RFP table:
RFP grey-blue IP DECT base station is not active (not connected or disturbance)
RFP black IP DECT base station is active
The data of a IP DECT base station are displayed in a dialogue box after clicking on the
respective IP DECT base station field in the RFP table. The statistics data of the IP DECT base
station can be called up from this dialogue box.
The following colour scheme is used for display of the telephone in the PP table:
PP black: Telephone is enrolled. It is assumed that the telephone can be reached.
PP blue: Telephone can presumably not be reached. Detach was received, or
when an attempt was made to reach a telephone, the telephone did not answer.
PP grey-blue: Telephone not enrolled.
The data of an telephone are displayed in a dialogue box after clicking on the respective
telephone field in the FP table.
The Sync Info child window contains all IP DECT base stations and shows their synchronization
and relation states to each other. Selecting the IP DECT base stations with the right mouse
button the user can change visibility views and can even force a resynchronization of an IP
DECT base station.