10
Chapter 1 About Avaya 7406 Digital Mobile Handset
NN40110-300
NN40110-300
Mounting Bracket
Avaya 7406 Digital Mobile Handset Pre-installation Programming
Before connecting the Avaya 7406 Digital Mobile Handset base station to your system, you must
set up system programming for the handset lines.
Have the system administrator set up this programming:
1
Program Handsfree to
Auto
.
2
Program a
maximum of three lines
to each handset.
3
Assign
Ring & Appear
on the lines you assign to the handset.
4
Set the
Page
zone
to
None
.
5
Set
DND on Busy
to
Yes
if you do not want your calls interrupted with a ring tone when a
second call comes in. Instead, the button flashes, indicating an incoming call.
6
Other telephone programming is the same as for the M7310 telephone, with the exception of
the memory key locations.
Before you start
•
Ensure there is an AC power outlet within 1.5 meters (5 feet) of the base station location.
Note:
Appear only
does not allow the handset to wake from
Handset Asleep
mode.
Note:
Handsets can send Page announcements, but they cannot receive them.
Mounting
bracket
Notches match to bracket.
