manualshive.com logo in svg

Avaya 7406, Installation Manual

Share
Download
Avaya 7406 Installation Manual Download Page 14

14

Chapter 1 About Avaya 7406 Digital Mobile Handset

NN40110-300

NN40110-300

Handset Power

Power to the handset comes from the battery pack installed in the back of the handset. When the 
battery pack power level is low it must be recharged in the charging unit.

Low battery

When the power is low, a tone sounds every 15 seconds indicating you need to recharge the battery 
soon. Your call is automatically put on hold 20 seconds after the battery pack runs out. 

Recharge

Recharging begins as soon as you put the handset in the charging unit. Refer to 

“Charging the 

Avaya 7406 Digital Mobile Handset Battery Pack” on page 12

. 

•

Be sure that the handset and charger contacts touch. A red LED indicates the battery is 
charging.

•

To fully recharge the battery pack, leave the handset in the charger until the indicator light 
turns green.

Battery levels

The following icons appear on the display.

Note: 

Make sure the battery is properly installed in the handset or seated in the 

charger. If the Avaya 7406 Digital Mobile Handset battery is not properly 
installed, or if the battery level is extremely low, the six programmable buttons 
may light or flash simultaneously. This may also happen when the handset is in 
the charger. Exchange the handset battery pack regularly (once a week) if you 
have a second (spare) battery pack. The spare battery pack trickle charges in 
approximately 12 hours. When the spare battery pack is fully charged, the 
indicator light turns green.

Note: 

If the Avaya 7406 battery is not properly installed, or if the battery level is 

extremely low, the six programmable buttons may light or flash simultaneously. 
This may also happen when the handset is in the charger.

Indicates battery 

pack is fully charged.

Indicates battery 

pack is 2/3 charged.

Indicates battery 

pack is 1/3 charged.

Summary of Contents for 7406
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands