manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 29

Descriptions

Avaya 374x DECT Telephones - User Guide

02/2016     

29

3

3745/3749:
Colour display
The full graphic type display is 128 pixels wide and 160 pixels high. 
The display has multiple colours and backlighting.
3740:
B/W display
The full graphic type display is 128 pixels wide and 160 pixels high.
The display is monochrome black and white, with backlighting.

4

Four-way navigation key
Use this key to step in the menu and when working in text mode. 

,  ,  , and   are used for stepping left/right and up/down in the 

menu. The navigation key can be programmed, the   is by default 
a shortcut to the Inbox, and   is a shortcut to Call contact. See 
also 

 Defining navigation key

 on page 88. During a call the volume 

can be increased or decreased by pressing  and .

5

On-hook and On/Off key
Combined button; to end a call, to return to idle mode, and to 
switch the handset on/off by long press.

6

Tactile indicators
There are two tactile indicators to indicate the centre of the key 
pad

7, 15

Sound off key/Mute/PTT button 
To turn on/off audible signals in idle mode, silencing the ring signal
at incoming call and to mute in call.

During a call, a long press on the button changes between microphone on/
off.

8

Space
To add space between text

9

Multi-purpose connector
The connector is used for battery charging, software download, 
configuration and connection of an IP 65 classified headset connector.

10

Microphone
The microphone is placed on the front bottom side of the handset.

11

Key lock and Upper/Lower case key
This key is to lock the keypad in combination with the soft key "Lock". 
This key is also for switching between upper/lower case and digits.

12

Voice mail access

1

A quick access to the handset’s Voice mail. See also 

 Voice mail

 on 

page 65.

13

Off-hook key
To answer a call, to pre-dial a number, and as a shortcut to the Call list.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands