manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 127

Maintenance

Avaya 374x DECT Telephones - User Guide

02/2016     

127

LED Indications during Easy Replacement

The following table shows the LED indications that are used for the handset and the charger 
during the easy replacement procedure. 

4, 5

When the text "Please insert old phone in charger" is displayed, replace the new 
handset with the old handset. The handset can either be switched on or off.

Note: 

If the CR3 Charging Rack is used, the left charging slot must be 

used for both handsets.

The handset is restarted and after a few seconds, the text "Saving settings. Do 
not remove phone from charger" appears. The charger LED changes to slow 
orange flashing. It may take several minutes.

!

Important:

Important:

If the old handset cannot communicate with the charger, 
put the new handset in the charger to restore its settings 
(that is, the handset’s IPDI). If this step is not performed, 
the new handset must be sent for service. The old 
handset’s settings might be transfered to the new 
handset by using PDM/Device Manager. See the 
handset’s Configuration Manual.

6, 7

When the text "Please insert new phone in charger" is displayed, replace the old 
handset with the new handset. The text "Restoring settings" is displayed.

!

Important:

Important:

Do not remove the handset while the text "Restoring 
settings" is displayed

8

 When the text "Phone successfully replaced. Please remove phone to restart." 
appears in the display, remove the handset from the charger. The handset is 
automatically restarted.

LED indication

Description

Orange, flashing (1 000 ms on, 1 000 
ms off)

 File transfer during Easy Replacement.

Orange, flashing (100 ms on, 800 ms 
off)

“Change phone” indication during Easy 
Replacement.

Red, flashing (100 ms on, 800 ms off) Error indication during Easy Replacement. Put 

back new handset in charger.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands