manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 122

 

122

     Avaya 374x DECT Telephones - User Guide

02/2016

Operation Notice

Accessibility and voice quality

The base network is not always available. If you do not get in contact with your system, contact 
your system administrator. For best voice quality, avoid positioning near computer, radio or 
similar equipment.

Operating area

You can only use your cordless telephone in the area that is covered by your system. Outside 
this area, you will loose contact with the system. The signal strength icon will be low and 

Searching

 text will be displayed.

Out of Range

When you leave the system's coverage area a short beep will sound and the text “Searching” 
will appear in the display.

The out of range beep is repeated every minute for 30 minutes. The sound can be turned off by 
long pressing, 

, or 

.

NOTE: 

If handset restriction is enabled, it might not be possible to turn the sound off. See the 

handset’s Configuration Manual.

When re-entering the coverage area it can take a couple of minutes before the handset 
automatically has registered into the system.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands