manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 70

 

70

     Avaya 374x DECT Telephones - User Guide

02/2016

Figure 6: Incoming invitation received as call

1. Press “Accept”, or 

.

Default the handset starts in inverted mute and loudspeaking mode, but it can be 
configured differently in a PTT group.

2. Press and hold 

 to open the microphone for transmitting. The microphone is muted 

again when 

 is released.

Invitation received as incoming call during an ongoing call: 

If a user receives an invitation during an ongoing call, it is displayed as an ordinary invitation, 
see 

figure 6

 on page 70. The user can either accept or decline the invitation by pressing 

"Accept" or "Decline", respectively.

NOTE: 

It is not possible to accept or decline the invitation by pressing 

 or 

, respectively.

If the user presses “Accept”, the ongoing call is disconnected and the PTT call is connected.

Alternatively, the ongoing call can also be disconnected and the PTT call connected if the 

following is fulfilled:

●

The handset is configured to answer invitations automatically

●

The user does not respond to the invitation within 10 seconds

If the user declines the invitation, the he/she can re-join the PTT later on, see 

 Re-joining a 

group

 on page 71.

Calling a PTT Group

NOTE: 

PTT group(s) must be defined in the PDM/Device Manager and Messaging Group(s) in 

AIWS2 to be able to use this function. See the handset’s Configuration Manual, and Installation and 

Operation Manual for AIWS2.

1. Press "Menu".

2. Select 

in the menu.

3. Select "PTT groups".

4. Select PTT group.

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands