manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 124

 

124

     Avaya 374x DECT Telephones - User Guide

02/2016

!

Important:

Important:

It is not permitted to charge intrinsically safe batteries using the battery pack 
charger.

Replace the Battery

If the standby time for the handset becomes too low, the battery should be replaced by a new 
one. Please contact your system administrator or your supplier, for information about new 
batteries. Attach the battery as described in 

figure 13

 on page 128. It is attached inside the 

battery lid and is connected to the handset in such a way that no misalignment of the contact is 
possible.

NOTE: 

Use the battery pack opener to untight the screws on the intrinsically safe handset.

Figure 12. Replaceable battery. Unlock the lid, loosen the screws and remove the battery 

according to the illustration.

Easy Replacement of Handset

Easy replacement can be used if a handset needs to be replaced due to, for example, a broken 
display. The easy replacement procedure is done via the handset display and the DC4 

Advanced Desktop Charger, or the CR3 Charging Rack.

The following settings are replaced during easy replacement:

●

DECT registration

●

User parameters (including User ID)

●

Contacts

1

1

3

2

1

3

2

Intrinsically safe handset

Non-Intrinsically handset

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands