manualshive.com logo in svg

Avaya 3740, User Manual

Share
Download
Avaya 3740 User Manual Download Page 43

Menu tree

Avaya 374x DECT Telephones - User Guide

02/2016     

43

Messaging  

*) Only visible if the number consists of minimum 3 digits.

*) Call priority is used to set the importance of calls compared to messaging services. The 
setting determines whether:

●

Call information presented on the display during incoming, ongoing and outgoing call, 
shall be suppressed when viewing a message.

●

An ongoing call shall be disconnected when receiving a remote call setup request with 

answer mode property set to 'Automatic'.

Place the handset in the charger and configure call priority through Win PDM > Edit parameters 
> Settings > Messaging > Call priority.

●

0 = Overrides all messages and ongoing call is never disconnected.

●

1-9 = Comparison with message priority, highest priority will be shown and call 
setup priority higher or equal causes disconnection.

• Delete
• Forward
• Call sender
• Call no. in text*
• Save number

• Enter text

• Sent 

• Reply

• Delete
• Delete all

• More

• Close

>
>

>

>

——>

• Inbox

Message List

            

Message List

——>

——>

——>

 —>

• Enter text   >

>
>
>

• Write new message

 —>

Message List  —>

• Delete
• Call no. in text*
• Save number

• Forward

• More

• Close

• Enter text   >

 —>

 —>

>
>
>

• Unsent

>

• More

• Back

 —>

 —>

• View

——>

——>

• Delete
• Delete all

• More

• Back

 —>

 —>

• View

• Send

• Delete
• Delete all

• Clear

• Back

>

>

• More

• Back

 —>

 —>

• Edit

——> • Enter number   >

Summary of Contents for 3740
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands