AVANT A36883, Operator'S Manual For Attachment

Page: 33 / 40

33 (40)
.
2. The hydraulic motor must be fitted according to which side the brush is installed to.
Positions of the hydraulic motor and hydraulic hose lines depending on the side to which the brush is
installed:
Fitting the side brush on the left side Fitting the side brush on the right side
3.

The hydraulic connections of the valve of the broom are shown below in Table 5.

To make the installation easier, it’s a good idea to mark both ends of each hose with i.e. tape,
making it easier to connect the hoses correctly.

When seen from above, the hydraulic motor will rotate clockwise, when pressure is connected to
port A of the motor.

Route the hydraulic hoses in a way that they will not be left stretched, twisted or bent tightly.
Tighten the hose clamps after all hoses and fittings have been tightened to their final tightness.