32 (40)
Check the routing of hoses and movements of the attachment
After tightening the hydraulic components, test the movements of the attachment thoroughly. Check that the
hydraulic hoses can not get stretched or pinched in any position of the loader boom or the attachment, or that
the hoses are not in contact with sharp edges.
After thoroughly checking that the hoses are connected and fittings tightening, check the tightness of the
fittings as described below. The hydraulic system will de-air itself when using the auxiliary hydraulics of the
loader.
7.4
Fitting a side brush or changing the installation side
The separate installation kit A35698 for the side brush is ready to be installed on the right side of the broom
when delivered.
1.
Install the side brush installation bracket
2.
Check for correct orientation of the hydraulic motor
3.
Connect hydraulic hoses and secure them from hanging loose
4.
Check all made connections carefully and test for leakage
1.
To install a side brush, first install the
bracket (1) to the broom.
Fit the brush arm (2) with its locking pins
(3).
The adjacent figure shows the orientation
of fitting when installing the brush to the
right side of the broom.
Summary of Contents for A36883
Page 2: ...Collecting broom 1100 2018 1 ...
Page 40: ......
