26 (40)
.
6.8
Water spraying system
A water spraying system is available for reducing the
spreading of dust during use of the broom.
The system contains:
1.
60-litre water tank and an electric pump under the
tank
2.
Shut off valve
3.
Spraying tube with four nozzles
The spraying system is intended for spraying only
water. Using solvents or cleaning agents is not
permitted, as they might damage the components of
the system. Do not leave water lying in the tank for
long periods and make sure that the water in the
system will not get frozen.
4.
Side brush water nozzle (included in the side brush
assembly).
Drain the system completely before storing the attachment in freezing conditions. Adding
some wiper fluid in the tank and running it through the pump and nozzles can prevent
freezing of small amount of water.
The pump of the water spraying system will get damaged easily, if it is run dry. Make sure
that there is water in the tank. After use switch off the spraying system and close the
water hose valve to prevent draining of water. Also remember to open the valve before
use.
6.8.1
Using the water spraying system
To operate the water spraying system, if fitted, the electric harness for the water pump in the collecting broom
must be connected to the loader. The pump of the water spraying is operated with either of the electric switch
options or attachment control switch pack. See page
16 for more information about connecting the electric
harness of the attachment.
1.
A cable harness with an ON-OFF switch is delivered with the
attachment. Use the switch to turn the watering system pump on or
off.
See page
16 for instructions about how to connect the electric
harness of the attachment.
Keep the switch in the cab so that it is easily accessible, but will not
be used inadvertently.
Summary of Contents for A36883
Page 2: ...Collecting broom 1100 2018 1 ...
Page 40: ......
