20
Restore Codes - Single Codes
Restore Codes - Single Codes
1
2
3
4
Z O N E S
AC LB PA
142 144 146 148
158 160 162
E
E
E
E
CODES
E
E
E
143 145 147 149
159 161 163
1
2
3
4
CODES
9
B
A
Restore Codes - Extended or 2 Digits
Restore Codes - Extended or 2 Digits
Bypassed Zones Codes - Single Codes
Reserved
1
2
3
4
Z O N E S
174 176 178 180
8
8
8
8
CODES
175 177 179 181
1
2
3
4
CODES
Bypassed Zones - Extended or 2 Digits
Closing (Arming) Codes-Single Digit
Opening (Disarming) Codes-Single Digit
Single Digit
1
2
3
4
Test
USER
1
2
3
4
Test
Force
Opening
220 222 224 226
236
238 240 242 244
254
256
C
C
C
C
A
CODE
B
B
B
B
D
221 223 225 227
237
239 241 243 245
255
257
1
2
3
4
9
CODE
1
2
3
4
9
Closing Codes - Extended or 2 Digits
Opening Codes - Extended or 2 Digits
In order to disable reporting Closing/Opening change program at address
072; remove value ’3’.
When SIGNAL TEST is enabled, you can specify to report System Status (as default for Extended or 2 digits) by programming for example
‘A’ (Armed) at 236, and ‘D’ (Disarmed) at 254, ‘9’ is the test signal code. For System Status repo
rt, select extended or two digits format.
For programming the End-User codes 1 to 8 (Arm/Disarm code) via installer programming mode, enter to address No. 099,
then program new codes by first entering the code index (1,2,3..).
For Force Opening Code (Ambush) the user should enter the Disarming code in reverse order.
TEL. 2 - SUBSCRIBER ID NUMBER
Note: For subscriber ID that contains a ‘0’ (zero), enter 10 in place of 0. ‘0’ will be displayed as ‘A.’
Do not enter 0 0.
Group 1
Group 2
Alarm / Restore ID Alarm / Restore ID Open. / Closing ID
260 261 262 263 268 269 270 271 276 277 278 279
To easily program the subscriber ID number, as a sequence of 4 digits use the EASY Program.
Even if your code is 3 digits only you must enter 4 digits, the 4th digit can be any digit and the system will disregard the 4th digit.
EASY Program
EASY Program
EASY Program
Alarm / Restore ID Alarm / Restore ID Open. / Closing ID
360
368
376
