14
To enable the DTMF control program address 074/6 “Enable remote access by telephone”, and
074 - 2
“
Enable A1 activation by telephone
”.
Keypad online conformation and DTMF functions history
When the control panel detects the first DTMF key, five short beeps sound at the keypads. The
keypad activation shows the user at the remote site that a DTMF connection takes place (in case of
mistaken connection or similar).
During the remote access the keypad display 'd' and all LEDs blink fast from time to time.
When the call ends, the three short beeps sound at the keypads. When the user code is in process,
the keypad display shows a line for each code number entry (disclose the code), then each DTMF
number pressed show the received number. History log: Each call, confirmed by a valid user code,
is recorded in the events history. Each "Arming/Disarming" is recorded in the events history.
"Last users" history will display 'ut' for "user "telephone, followed by the User number.
Notes: 1. The keypad buzzer or other loud sounds may jam your DTMF entries, in case the
keypad is close to your DTMF telephone, during testing disable the buzzer.
2. When entering the DTMF commands wait for “quit” period, if entering commands
during the system confirmation tunes, or other tunes the panel may miss the DTMF entries.
The panel calls the user during alarm
When the control panel calls the user during alarm, it will first generate the siren sound for about
30 seconds (to shorten this feature at address 085 “Tel. Message Time”, to
30, as default is 50
seconds). The siren sound will stop ten (10) seconds before the end of the call and a greeting tune
will be sounded, after the greeting tune enter your code followed by #. To stop the dialer enter 6#,
to get panel status enter 7#, to disarm the panel enter 2#. To end the process press 9#.
The control panel will answer the call after the number of rings programmed at address 091 (or
following the “bypass answering machine" procedure).
Commands
Each command must be followed by the '#' key (Enter) in the remote phone. The control panel
waits 4 seconds between the keys typed. When this time expires, previous keys input will be
discarded.
The key '*' cancels previous input. It’s recommended to start with "learn" function [8X #] to
identify the various confirmation tune.
The commands:
[0 X #] - Bypass zone (# is the Enter key)
X is Bypassed zone 1 to 8
To clear all bypassed zone: 0 9 #
The zone bypass command is valid only when the system is in Disarm position and not in Alarm
position.
[1 #] - Arm control panel. The control panel will be armed even with open zones. After the
arming, a confirmation tune followed by an "armed" tune will be sounded ("Armed" tune: Short
beep followed by a long tone.).
The user can wait a few seconds to be sure that no alarm has been caused by open zones. In this
case, an Alarm tune (siren sound) will be sounded.
