Autronica AutroVoice miniVES 2001, Service Manual

Page: 90 / 156

90
COMPACT VOICE ALARM SYSTEM
SERVICE MANUAL
3
Auto-Save Interval
This option, when activated, results in having the current configuration saved into the configuration file at predefined
intervals expressed in minutes.
4
Auto-Save History
In this section you declare the number of autosave configurations you wish to be stored in the software. It is closely linked
to the autosave interval, if the interval is set to 1 minute and the value of the autosave readout is 10, then the configurator
will allow to load the maximum of 10 minutes back. Of course, both the save interval and the number of files to read may
assume a value from 1 to 99.
12.3.3 System
1
Verify Configuration
The configurator checks created configuration for it’s integrity. It classifies verified elements into 3 groups – Errors , Warnings
and Info . If the software detects configuration errors, it will not allow it to be loaded into the system. By selecting Show details ,
we gain access into the details of the problems which have occurred.
2
Restore to factory defaults
This function completely erases configuration files, logs and audio files from all of the devices connected to the AutroVoice
miniVES system. All of the memory cards will be formatted and the devices will be assigned with IP addresses from the
192.18.x.x pool. The packets responsible for the factory settings commands are UDP and are received regardless of the
set internal IP addresses in the system. If the System has executed the restore to factory defaults command, the project
signature has also been changed, in order to update it in the configurator software you must download the system config-
uration. You can also select the
recreate topology option, enter an empty configuration into the system and then restore
the system to factory defaults.