Autronica AutroVoice miniVES 2001, Service Manual

Page: 129 / 156

129
3. A downloaded running AutroVoice miniVES system configuration cannot be opened
The downloaded file from the system, config.afz can be found in the tab Documents –> Selector –> Workspaces_x.x.x (where x
indicates the version of the software) –> downloadedConfiguration. To run the downloaded file from the system (* .afz) you need to:
1. Select in the configuration software: File –> Import working area
2. As a standard, the configuration software creates files and saves them under: C:\Users\Documents\Selector\
Workspaces_x.x.x \downloadedConfiguration. If you have chosen a different access path, please choose from it the
appropriate file with the .afz extension and then select option
Open .
3. When you select Open option, the system asks for the indication of a new folder in order to copy the imported content
from the system configuration. You should create a new folder, give it any name, select it and choose Select Folder
option.
Please note that it is a very important step!
4. Select YES option in the window if you want to open the imported configuration
5. The configuration will be loaded – in the System connection window with the Connect option, the Same configuration
status should be shown. If Different configuration status is shown in the window, please select File –> Load –> the
newly created folder while importing the file with the .afz extension. There are configuration.afz files available in the
location they were created when configuring the system. You have to load those files and then check the status until
it shows the
Same configuration status .
4. DFMS, DMS or DMS-LCD microphone reboots when connected to the system
If you additionally connect a microphone to a properly functioning system, and it resets after connection this means that the
microphone does already have a preloaded configuration in it’s internal memory which is different from the configuration
of the system. In this situation the factory (default) settings should be restored to the microphone and then the microphone
should be reconnected.
5. The configuration software suspends while trying to compare the topology
of the configuration created in offline mode
If the system cannot properly detect the devices available on the AutroVoice miniVES network and prevents assigning MAC
addresses to the configuration items created in offline mode it means that the list of devices in the Working area is different
from what is visible in the system. The solution to this, is to create a new project, which does not include any devices in the work-
space and then select the
Recreate topology option ( System –> Connection Settings ). In this way you get to know the correct
arrangement of the system devices in the workspace.
The arrangement of devices in the workspace should be restored to it’s original configuration created in offline mode and then
option Recreate topology –> Compare should be reselected. Followed by a table appearing with all elements available in the
system. To fill in the missing MAC adresses and serial numbers, use the FIX button.
6. The system does not respond to command Restore to Factory Defaults
Each project possess its own unique Factory Defaults signature, which is available in the window: Basic Configuration –> Factory
Defaults . Every time you call the Default settings, the system checks the validity of the system signature with the one located in
the configurator. Lack of compatibility will cause the command disregard.
7. How should I transfer a configuration that can be opened on another computer?
Full configuration means the device settings, source audio files, and summary of matrix, scenarios, zones etc. after conversion
to pcm. It is written via
Export workspace function in the File tab.