Automation Direct STRIDE SiteLink SE-SL3011, User Manual

Page: 34 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
2-4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Chapter 2: STRIDE SiteLink Platform
Getting started
These steps will get you up and running with the STRIDE SiteLink Platform
( https://www.StrideSiteLink.com ).
1. Create a User Account
To start using the STRIDE SiteLink Platform, you will need a user account. There are two ways
of setting up an account.
•
You can create a user account and a new company by filling out the registration form at
https://www.StrideSiteLink.com .
• You can join an existing company by being invited by a user already in that company.
In both cases you will receive a confirmation e-mail. Complete your account registration by
following the verification link inside.
NOTE: No e-mail? Be sure to check your spam folder if you haven’t received an e-mail in your inbox.
2. Login
Once you have a user account, it’s very easy. Just go to the login page and log in with your
e-mail address and password combination.
NOTE: Forgot your password? You can use the recovery form to request a password recovery e-mail. We will then
send you instructions for setting up a new password.
3. Choose Company
If you have just created your user account, it is probably linked with only one company. In that
case your company is automatically chosen and this step will not show up.
However, if your user account is linked to more than one company, you must choose the
company you want to use. During login you will see a list of companies you are linked to.
That’s it! You are now logged in. The next section provides a brief overview of the SiteLink
platform user interface, and the subsequent section walks you through registering your router
on the SiteLink Platform.