Automation Direct STRIDE SiteLink SE-SL3011, User Manual

Page: 25 / 123

STRIDE
®
SiteLink Series Industrial VPN Routers User Manual 1st Edition
1-11
Chapter 1: Hardware
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Operation
LED Status Indicators
The SiteLink router has two LEDs for router status, and one LED per Ethernet port.
Signal LED (SE-SL3011-4G & -WF models)
Color Mode Description
Red
Blinking continuously No reception
Red
Blinking 2 pulses SIM card invalid, PIN invalid or PUK required
Red
Constant Low reception
Purple
Constant Medium reception
Blue
Constant Good reception
Blue
Blinking Initializing
ACT LED
Color Mode Description
Red
Constant Booting or not registered
Red
Blinking 1 short pulse Waiting for internet access
Red
Blinking 2 short pulses LAN/WAN conflict
1
Red
Blinking 3 long pulses The router was removed from the STRIDE
SiteLink platform
2
Red
Blinking 4 long pulses The router was already registered to the
STRIDE SiteLink platform
3
Blue
Blinking 1 short pulse Connecting to STRIDE SiteLink platform
Blue
Blinking 2 short pulses Setting up VPN connection
Blue
Constant VPN connection active
1. The network range on the LAN side is in conflict with the settings on the WAN
side. The router cannot reliably access the internet because of this. Changing the
LAN side IP range generally resolves the conflict.
2. If you want to access the device again, you will have to reconfigure it via a USB
stick.
3. This means someone removed the router from the company after registration
without performing a factory reset. Fix this by performing factory reset and
configuring the router.
Ethernet activity LEDs
Color Mode Description
Blue
Constant Link up
Blue
Blinking Data activity
Signal LED
ACT LED
Ethernet
Port LED
(typical)