Inverter Air Source Heat Pump (AHGR32AW17) - Installation and Instruction Manual
02. Safety Precautions
Moving and Repairing
Entrust the moving and re-installation of
the unit to qualified personnel.
If the unit needs to be moved and be re-
installed, please contact a qualified person
or company to carry it out for you. Improper
installation may lead to water leakage,
electrical shock, personal injury, or fire.
Entrust the repair of the unit
to qualified personnel.
If the unit needs to be repaired, please
contact a qualified person or company to
carry it out for you. Improper installation
may lead to water leakage, electrical shock,
personal injury, or fire.
Do not repair the equipment
on your own.
Unless you are professionally trained, do
not repair or tinker with the unit on your
own to avoid electrical shock, fire, and other
accidents.
2.2 Warning (continued)
2.3 Attention
Installation
Operation
Keep away from flammable substances.
DO NOT install the unit near flammable
gases or substances. Leakage of these may
cause fire.
Check the baseplate /
foundation regularly.
Inspect the baseplate or foundation of the
equipment at least once every month to
avoid any decline or damage.
Switch off the power during
maintenance.
Please switch off the power when cleaning
the equipment or during maintenance
Provide appropriate machine foundation.
Make sure that the unit is securely positioned
and that its base is strong enough to prevent
it from falling.
Provide a circuit breaker.
Provide an appropriate and properly-sized
circuit breaker for the unit. Lack of circuit
breaker could lead to electrical shock or fire.
Do not use copper or iron as fuse.
It is prohibited to use copper or iron as fuse.
The appropriate fuse for the equipment must
be selected and installed by an electrician.
Do not spray flammable gas to the unit.
DO NOT spray flammable gas to the heat
pump to avoid fire.
6
