Inverter Air Source Heat Pump (AHGR32AW17) - Installation and Instruction Manual
01. Preface
1. Preface
Thank you for purchasing this AHG R32 AW Series - EVI DC Inverter Heat
Pump from Automatic Heating Global Pty Ltd.
In order to provide the customers with a high-quality, reliable, and versatile product, this
heat pump was produced in accordance with strict design and manufacturing standards. This
manual includes all necessary information about installation, handling, maintenance, and
troubleshooting. Please read this manual thoroughly before using the unit. The manufacturer
will not be held liable in case of damages or injuries resulting from improper installation,
handling, maintenance, and troubleshooting that is not in accordance with this manual.
The unit must be installed only by a qualified personnel.
Please take note of the following in order to keep
the warranty:
• The unit shall only be installed, opened, or repaired
by a qualified installer or an authorized dealer.
• Maintenance and operation must be carried out
according to the recommended procedures and
frequency stated in this manual.
• Use genuine standard spare parts only.
Failure to comply with the above-mentioned
conditions will invalidate the warranty.
AHG R32 AW Series - EVI DC Inverter Heat Pump
is an efficient, energy-saving, and eco-friendly
equipment that is mainly built for space heating. It
can work with any kind of indoor unit including fan
coils, radiators, and floor heating pipes, which can
all be connected to a single monobloc unit. This
equipment was designed to allow heat recovery via
a super heater that could generate hot water for
sanitary and other purposes.
This series of DC Inverter Heat Pumps has the
following features:
Advanced Control
The microprocessor-based controller can be used
to easily check or set the running parameters of
the heat pump. The centralized control system can
also be used to control several units via PC.
Neat Appearance
The heat pump was designed to be pleasing to the
eye. A monobloc unit has a water pump already
included, which makes it compact and also very
easy to install.
Easy Installation
The unit has a smart structure and a compact body
that makes it very easy to install outdoors.
Noiseless Operation
This device uses high quality and efficient
compressor, fan, and water pump that ensure low
noise level during operation.
Efficient Heat Exchange
This equipment uses a specially-designed heat
exchanger that is efficient, helping you save more
energy using the device.
Reliable
This device was built to work even under extreme
working conditions. It can work under an ambient
temperature as low as -15ºC for heating.
4
