Inverter Air Source Heat Pump (AHGR32AW17) - Installation and Instruction Manual
05. Control & Operation
5.1. Main Interface Display and Function
5. Control & Operation
1
2
3
4
5
6
7
10
9
8
Name
Function
1
On/Off
Switch ON and OFF.
Red indicates ON, while grey indicates OFF.
2
Mode
Hot water mode, heating mode, cooling mode, hot
water+heating mode, or hot water+cooling mode can
be selected
3
Temp. Setting
Sets the target temperature
4
Lock screen
Click to lock the screen. White indicates disabled,
while green represents enabled.
5
Timer Setting
Set the timer. White indicates “disabled”, while green
indicates “enabled”.
6
Setup
Check the status of the unit, time, factory parameter,
temperature curve, timer setting, and mute setting.
7
Fault
This icon will flash whenever there is an error.
The display will enter Failure Record Interface upon
tapping this icon.
8
Defrost
Machine is in defrosting mode when this icon is shown
9
Hot Water Mode Machine is in hot water mode when this icon is shown
10 Cooling Mode
Machine is in cooling mode when this icon is shown
Key Functions
1. Power On Interface
2. Starting Up Interface
12
