manualshive.com logo in svg

Autodesk 057A1-05A111-1001 - AutoCAD LT 2009, Getting Started Manual

Share
Download
Autodesk 057A1-05A111-1001 - AutoCAD LT 2009 Getting Started Manual Download Page 53

Plan the Drawing Units and Scale

|

47

For example, if you are a mechanical engineer who normally works in millimeters, you would set 
the format for linear units to decimal. If you are an architect who normally works in feet and inches, 
you would set the format to architectural.

The drawing unit format controls only the display style of the drawing units on-screen, such as in 
the display of coordinates and values in the Properties palette, dialog boxes, and prompts. 

Try it: Check the drawing unit format and precision

1

Click Menu Browser 

➤ 

Format 

➤

 Units. In the Drawing Units dialog box, notice the display style 

selected for linear and for angular units.

NOTE

Think of this dialog box as the Drawing Units 

Format

 dialog box.

2

Notice the value displayed under Precision. This represents the decimal or fractional rounding 
of values displayed on-screen.

3

Close the dialog box.

Summary of Contents for 057A1-05A111-1001 - AutoCAD LT 2009

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands