Autodesk 057A1-05A111-1001 - AutoCAD LT 2009 Getting Started Manual Download Page 115

Page: 115 / 184

Use Editing Aids

109

Use Editing Aids

The following editing aids help you modify drawings efficiently:

■

Grips

edit objects using your cursor and a shortcut menu.

■

Revision clouds

identify areas that have been updated.

Edit with Grips

Grips are small squares and arrows that appear on an object after it has been selected. They mark
control locations and are powerful editing tools.

After you select an object, you can click a grip and move it with your cursor. For more options, click
a grip and right-click to display a shortcut menu. Then choose a grip edit mode.

select line

click grip

move grip to end of
horizontal line

grip edit modes

grip edit mode options

Summary of Contents for 057A1-05A111-1001 - AutoCAD LT 2009

























































































































































































Search results

Summary of Contents for 057A1-05A111-1001 - AutoCAD LT 2009

Reviews:

Related manuals for 057A1-05A111-1001 - AutoCAD LT 2009

Brands by name

Popular brands

Autodesk 057A1-05A111-1001 - AutoCAD LT 2009, Getting Started Manual

Search results

Summary of Contents for 057A1-05A111-1001 - AutoCAD LT 2009

Reviews:

Related manuals for 057A1-05A111-1001 - AutoCAD LT 2009

Brands by name

Popular brands