AutoAnchor 560, Owner'S Manual

Page: 6 / 41

Part #9507 Male Field Connector
Part #9508 Female Field Connector
If there is no plug on the sensor or console cable attach the AA field
connector to the wires and use the connecting cable as above.
2.1.3 PLUG AND PLAY SENSOR CABLE
The AutoAnchor plug and play sensor extension cable is 2 core tinned shielded cable. It
must be used to connect the sensor to the console unit. This cable is shielded and ensures
the product meets the EMC requirements.
Ensure the connectors are firmly screwed together.
The warranty does not apply if the sensor cable plugs are removed.
The sensor cable and the console sensor cable are fitted with female plugs.
Sensor connecting cable with a male plug at each end is available in the following lengths:
6.5 m (21.33 ft) Part #9500
10 m (32.81 ft) Part #9501
15 m (49.21 ft) Part #9502
20 m (66.62 ft) Part #9503
25 m (82 ft) Part #9504
35 m (114.83 ft) Part #9514
AutoAnchor
AA560
Console
Up Down
Sensor
Chainwheel
Sensor Connecting Cable
Fitting the Sensor:
Do not force the sensor into the hole. Hammering the sensor head
can damage the internal electronics. Ensure the sensor head is positioned so that it will not
be hit by the chainwheel during windlass operation and that it is at least 300mm (1ft) away
from the battery and motor cables. Secure the sensor using a good quality neutral cure
silicone or a strong adhesive eg. Sikaflex 291 or 3M 5200.
Field Connectors
Connecting 2 cables together:
If you need to extend the cable length - 2 cables can be joined
together using Part #9510 Gender changer.