AutoAnchor 560, Owner'S Manual

Page: 22 / 41

PART 4 OPERATION
AA560 BUTTONS
4.1.1 Lock
The AutoAnchor is fitted with a lock to help protect against unintentional windlass
operation.
Hold the Mode button for 2 seconds to unlock.
Unlocked Locked
The lock automatically resets 5 minutes after the AutoAnchor was last operated or when
the AutoAnchor is turned off. You can also reset the lock by holding down the button
until
the key
is displayed in the top right corner.
Note:
Some operators prefer to swap the Up/Down buttons as follows:
Up = Out and Down = In. See the instructions on page 18.
In an emergency shut off the
power to the windlass using
the isolating/breaker switch.
Down Up
Auto ON/OFF
Sensor Pulse Indicator
& Windlass Direction
Standard AA
Operation
Functions
Hold 2 sec
to Turn Off
Hold 2 sec
to Unlock
Status bar
4.1 INFORMATION DISPLAYED DURING OPERATION
•
The length of rode deployed in feet, metres or fathoms.
•
The direction the anchor is moving.
•
The type of rode being deployed (chain or rope).
•
Windlass speed.
Settings and measurements are saved if the unit is turned off or the battery fails.
Counting continues if the windlass is operated by another control eg foot switches.
15