AutoAnchor 560, Owner'S Manual

Page: 21 / 41

3.10 DRUM WINCH SET UP
Access via the Windlass Set Up Menu. 3 settings are
required:
Total Rode Length.
Inside Diameter.
Outside Diameter with rode retrieved.
Select Inside diameter.
Enter the measurement in mm or metric inches
(depending on the units selected).
Save and return to Drum winch set up.
Repeat for Outside Diameter.
Exit to Windlass Set up. Press twice to exit to the Set
Up menu or hold for 2 seconds to return to the start
up screen.
3.10.3 To Enter the Inside and Outside Diameter
3.10.1 To Access Windlass Set up
Turn the AutoAnchor Off.
Hold together to access the Set up menu.
Scroll to Windlass.
Select Windlass.
3.10.2 Set Total Rode Length
Add total length of chain plus total length of rope
Defaut = 60m or 196ft. Minimum setting = 10m (33ft)
Scroll to Total rode length.
Select Total rode length.
Increase or decrease the value in meters or feet.
Save and return to Windlass Set up.
Setting:
Scroll to Rode.
Select Rode.
Scroll to Drum winch.
Select Drum winch.
Outside diameter -
rode fully retrieved
Inside diameter -
rode fully deployed
Rode
Inside Diameter:
Outside Diameter: