Auerswald COMpact 5200 Advanced Information Download Page 612

Page: 612 / 1114

612

COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018

Settings – Abonnés (Abo)

Propriétés / Synthèse des fonctions

Speaker announcement

Aucune

The subscriber may not perform speaker announcements.

[Name]

The subscriber can perform speaker announcements on the selected
announcement output.

Toutes les interfaces de paging

The subscriber can perform speaker announcements on all announcement
outputs.

Commutation des relais et des alarmes



The subscriber can switch relays and alarms manually.

Commande du système par téléphone



The subscriber may change settings of the PBX (e. g. do-not-disturb)

using a menu/function key or a character string.

Summary of Contents for COMpact 5200



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for COMpact 5200

Reviews:

Brands by name

Popular brands

Auerswald COMpact 5200, Advanced Information

Search results

Summary of Contents for COMpact 5200

Reviews:

Brands by name

Popular brands