COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
461
Settings – Réseaux publics
Connexions RNIS
•
Connection type PTP connection at external S
0
port
Numéro de téléphone du système
A PTP connection has a PBX base number (base number, header, base
phone number) and (Direct Dial In - DDI) extension numbers. The network
provider assigns the phone numbers for the connection. The phone number
to be dialled is formed from the PBX base (DDI) extension
number.
Nom
For identification of the connection within the PBX.
Extensions block (DDI numbers)
de À
A PTP connection has a PBX base number (base number, header, base
phone number) and (Direct Dial In - DDI) extension numbers. The network
provider assigns the phone numbers for the connection. The phone number
to be dialled is formed from the PBX base (DDI) extension
number.
Notes:
you can enter a zero both as a single number (e.g. 0 to 99, as is usually
the case) and as a digit in the set number of places in extension numbers
(e.g. 00 to 99).
If linear call distribution for the PTP connection is enabled (
Réseaux
publics > Acheminement des appels
page), and if the internal
numbers match the external extension numbers, the system automati-
