AudioCodes Mediant 800 MSBG, User Manual

Page: 398 / 890

SIP User's Manual 398 Document #: LTRT-12804
Mediant 800 MSBG
First Ring On Time [10msec]=200
First Ring Off Time [10msec]=400
#GR-506-CORE Ringing Pattern 2
[Ringing Pattern #2]
Ring Type=2
Freq [Hz]=20
First Ring On Time [10msec]=80
First Ring Off Time [10msec]=40
Second Ring On Time [10msec]=80
Second Ring Off Time [10msec]=400
7.1.2 FXS Distinctive Ringing and Call Waiting Tones per
Source/Destination Number
The device supports the configuration of a Distinctive Ringing tone and Call Waiting Tone
per calling (source) and/or called (destination) number (or prefix) for IP-to-Tel calls. This
feature can be configured per FXS endpoint or for a range of FXS endpoints. Therefore,
different tones can be played per FXS endpoint/s depending on the source and/or
destination number of the received call. This configuration is performed using the
ToneIndex
ini file table parameter, which maps Ringing and/or Call Waiting tones to source
and/or destination number prefixes per FXS endpoint/s.
Typically, the Ringing and/or Call Waiting tone played is indicated in the SIP Alert-info
header field of the received INVITE message. If this header is not present in the received
INVITE, then this feature is used and the tone played is according to the settings in this
table.
For example, to configure Distinctive Ringing and Call Waiting tones of Index #9 in the CPT
file for FXS endpoints 1 to 4 when a call is received from a source number with prefix 2,
configure the following in the
ini file:
[ToneIndex]
FORMAT ToneIndex_Index = ToneIndex_FXSPort_First,
ToneIndex_FXSPort_Last, ToneIndex_SourcePrefix,
ToneIndex_DestinationPrefix, ToneIndex_PriorityIndex;
ToneIndex_Index 0 = 0, 3, 2, , 1;
[\ToneIndex]
FirstCallWaitingToneID=8
Note that the Call Waiting tone index equals to the priority index plus
FirstCallWaitingToneID(*). For example, if you want to select the Call Waiting tone defined
in the CPT file at Index #9, then you can enter 1 as the priority index and the value 8 for
FirstCallWaitingToneID. The summation of these values equals 9, i.e., index #9.