Checking and topping up fluids
.. Press the release lever
¢Fig. 210
in the direc
tion indicated (arrow). This will release the ar
rester hooks.
.. Open the bonnet.
&
WARNING
To avoid the risk of being scalded, never open
the bonnet if you see steam or coolant escap
ing from the engine compartment. Wait until
no steam or coolant can be seen before open
ing the bonnet.
Closing the bonnet
.. To close the bonnet, pull it down to overcome
the spring pressure.
Engine compartment layout
Main components for checking and refilling
.. Then let it drop into the catches;
do not press
down
¢
,8.
.
&
WARNING
- For safety reasons the bonnet must always
be completely closed when the vehicle is
moving. After closing it always check that it
is properly secured. The bonnet must be
flush with the adjacent body panels.
- Should you notice that the bonnet is not
safely secured when the vehicle is moving,
stop the vehicle immediately and close the
bonnet properly, otherwise it could cause an
accident .
Fig. 211
Typical locations of fluid containers and engine oil filler cap
(D
Coolant expansion tank
(-L) .....
@
@
@
Engine oil dipstick ............ .
Engine oil filler cap(�) ...... .
Brake fluid reservoir
((0))
222
225
®
223
224
®
226
0
Jump-start terminals: under a cover
(+);
earth point on body(-)
. . . . . .
249
Fuse box .....................
254
Windscreen washer container (W)
229 ....
